Our Catio

Thanks to Cat and Caboodle we were able to quickly build this catio. Our cat Lazarus LOVES it and our new kitten Binx likes it too. It is on its 3rd year and still standing strong and looking great! Look at the post on this blog titled “From Cat and Caboodle” for complete instructions and tons of other submissions of other examples!


These are the cubes we found at Bed Bath and Beyond. They were $19.99 plus tax. We used 4 boxes to construct our catio plus tons and tons of zip ties. We also decided to use inexpensive carabiners to make access to the front panel easy.


My husband cut a scrap piece of plywood and installed a cat door in it. We only have it in the window when we are home. He added an old drawer pull on the inside at the top to make it easy to put in and take out of the window. It is now painted white to match our home.



Here are the rest of the views. The first picture below has snow, our cats go out in all kinds of weather so we give them access year round. This past summer we found a nice large pot of cat grass at a local nursery. He loved chewing on the long grass!

E0CD4360-1AC9-4B3E-A1D4-15CB383B16BE-2 IMG_1628-2 IMG_2298-2

The wood you see at the bottom was only added to make the entrance height match the window for access. We could have just set it right on the ground. My husband simply drilled holes and used the zip ties to attach to the base.


How to build your own catio from Cat and Caboodle

I have pinned this post to the top of the page so the instructions are always easy to find. If you are interested in the other blog posts please use the menu of recent posts on the right.


These pages originally written and compiled by Karen Horne between 2011-2014 for CatandCaboodle.com (defunct). Karen kindly passed copyright to me in order to keep this valuable information accessable. Thank you so much Karen for allowing me to maintain this information! Photos remain the property of their original submitters. Photos and text may not be published in whole or in part without permission. Please link to this page instead.

For $140 or Less (2011: About $200 for a very large size)

And Almost No Tools,

You Can Build Your Own Inexpensive, Custom, Semi-Permanent Outdoor Cat Enclosure


NOTE: If you own your home and have a smaller, fully-enclosed fenced yard, instead of building an enclosure you might consider this alternative from “http://catfencein.com/Cat Fence-In.

Benefits of this enclosure:
Flexible design that is completely customizeable to fit your space
Can be put on almost any surface
Permanent, yet able to be dismantled & moved (great for renters!)
Can be built by one person, even those with little experience with tools
Light enough for one person to slide, or 2 people to pick up and move, yet windproof and heavy enough that your kitties can’t crawl underneath

Height should be limited to 4 to 5 panels tall (app. 56″-70″)
Limited ability to add steps and levels to enclosure sides
No human-sized door (crawl-through access panel only)

If you’ve shopped for outdoor cat enclosures, you know that they are expensive. Building one yourself is complicated (even with plans) and requires tools, and still there’s no guarantee that the materials alone won’t cost as much as if you’d bought a kit.We thought of buying a http://www.kittywalksystems.com/, but even they are expensive for the kind of area we wanted to use for our cats. The limited vertical space of that system got me thinking, though: if cats can be content with such a limitation, why can’t I just make one out of materials with which I’m already familiar?

Tools and Materials needed:

For this project, you’ll need the following tools and materials:


A mallet

A pair of pliers OR a pair of gloves

Wire cutters/dikes/diagonal pliers (all terms for the same tool)…and that’s it.


About 6 boxes of wire cube storage: $20 each at Target ($120) as of 2008. (2011: These now come in boxes of only 4 cubes, for $26. Be sure to shop for these at yard sales and in thrift stores, where they frequently turn up.) The number of boxes of course depends on how large you want your enclosure to be, and how tall. The one shown on this page used 6 boxes. (2011 equivalent is 9 boxes.)


1 bag of 1000 7″ or 8″ cable ties (also called zip ties or tie wraps): $20 at home improvement stores. For smaller projects, 3 bags of 100 ties each might do, but after that you’re not saving money by buying the smaller bags. Besides, cable ties – like duct tape – have an infinte number of uses. Having leftovers is a great thing.

There are no directions, but I have many tips for you.
The reason there are no directions is that the box tells you how to put the cubes together, and I can’t tell you what the shape and size of your enclosure should be. But here are tips for building your perfect enclosure:

Access: Determine how your cats are going to come and go into their new outdoor playhouse before putting it together. If you need a panel with a cat door in it for a door or window, that will cost you more than the enclosure itself (we had to buy and install an all-weather panel to fit against our sliding-glass door). Cutting a hole through a wall and installing just a cat door is much cheaper, if you’re handy or know someone who is. Finally, in the pleasant-weather months, if you don’t need or use air-conditioning, and have a sliding screen door that you don’t mind butchering, you can cut a 14-inch square hole in one lower corner of the screen door, close the screen, and allow the cats to come and go through their 14-inch opening straight into the enclosure.

Design: The 14-inch square panels are strong, and so are the connectors, but I wouldn’t advise building an enclosure that’s more than 4 or 5 panels high, and your cats won’t need something that tall, anyway. The one I built has several sections to it, but the only section that’s more than 4 high is one on the end to accomodate a tree limb for climbing, and that section is only 2 panels square. If you’re already familiar with this product but haven’t purchased it recently, you should know that they’ve changed it so that some panels have 8 wires across and some now have only 4. It doesn’t matter which you use where, since even the ones with only 4 across still leave a hole too small for a cat to pass through. If you’re ever going to have kittens in your enclosure, though, be sure to use only the 8-across panels on the ground level, as a kitten can easily walk right through the 4-across panels.

If you’re going to build a run instead of an enclosure (as in the Kittywalk system), your cat will be happier if you build it 2 panels high (28″). Don’t put a bottom on your enclosure – your cats won’t like trying to walk on wire mesh. The enclosure can sit down directly on a deck, patio or grassy area, and its own weight will keep it from moving much (although it can be picked up and moved by 2 people). Your cats will not be able to crawl underneath, unless this is put directly on soil and you have a digger.

Construction: Your mallet will come in handy for tapping the panels into the connectors securely, squaring up sections that need it, and is pretty much mandatory for removing connectors from groups of panels that have already been joined. The nice thing about these materials is that you’re free to experiment and make mistakes: if you don’t like what you’ve done, just cut the tie wraps, pull it apart and start over.


What makes this so sturdy is the addition of the cable ties. Wrap a tie around every joint (every place corners of two or more panels meet) next to the connector. Pull them tightly using a pair of pliers, or your hands if you have gloves (one or the other is necessary; they’ll chew up your hands pretty quickly otherwise). Once you have the ties tightened, cut off the remaining portion with the wire cutters.

I was careful to face all of the cut sides outward, as the cut ends can be very sharp, and I didn’t want them as a hazard to my kitties. Thus, the joint you’re seeing in the photo above is facing the outside of the enclosure.

You may be wondering why you were told to buy such long cable ties when you’re cutting most of the tie off. The problem is that the smaller the tie, the less tensile strength it has. 7-8″ ties have a tensile strength of 50-75 pounds; the shorter ones have considerably less.

The Access Panel: You have to have a way in yourself to add goodies for your cats to lay on and play with, and to get them out when you need to and they don’t wanna (although luring them in with a treat is easier!) This is solved by making a 4-panel section be removeable.



Because it can’t be permanently tied to the rest of the enclosure, you have to stabilize this 4-panel section with cable ties. This was how I did it. (For the longer ties, notice that I cheaped out and tied two or three to each other to make one long tie, instead of buying longer cable ties.) The resulting panel will flex but won’t come apart, and it attaches to its “wall” by only the two top and bottom “feet”.

You’ll have to play with this to see what I mean, and to decide what will work best for you. Make sure it will attach to the rest of the structure at 4 points, but not so securely that it’s difficult to remove.


This joint has its connector with the smooth side facing the access panel, instead of connecting to it. The access panel’s wire panels are connected on the sides only by tie wraps.


And your enclosure is done! I added a large tree limb ($ free), which was already pre-cut by one of my neighbors. Your cats might appreciate feline-safe plants, but keep in mind that you won’t easily be able to get in every day to tend them if they need more than watering. (2012 Update: You’ll be happy to know that this outdoor enclosure has now lasted 5 summers and 4 winters, including snow load. There’s rust around most of the joints, but it’s otherwise structurally sound, if no longer bright and shiny. It’s not in this configuration any longer, though. I discovered that none of the cats care about the height (two panels high is plenty) and took advantage of the fact that it’s so easily remodelled to, over two summers, make it into a run which wraps down off the deck and around half the back of the house.)

2011: Below is a photo from Diane, who built her own enclosure following these tips. If you build your own and would like to send us a picture of it, we’ll post it here.


image To the left is a photo from Tim in Colorado. To give you an idea of what a small one like this would cost, he used only 3 boxes and got them at Target while they were just $12 per box (check for sales on these around the time students are going back to school). Wisely, he bought extra boxes at that price, so he’ll be able to expand this later if he wants to. His cat access is a pet door he installed into a screen (great, inexpensive idea). You can get relatively inexpensive pet doors/flaps at Petco and PetSmart. For the solid portions you see here, which his cat needs to walk and sit on, he used more wire panels and covered them with carpet padding (plastic shelving would be more weatherproof). He used cement pavers for the bottom of the enclosure, and extended it out to cover some of the lawn so his cat could enjoy lounging (and nibbling) on greenery. Unless your enclosure is completely under a covered porch, like Diane’s, definitely think about making any other materials you use and items you put in your enclosure weatherproof. Your cat will not stop wanting to use his or her enclosure in the winter. Ours go out in both snow and rain.

2012: Jennifer from Calgary, Alberta sent us the photos below of her own “catio” (I love that term!), showing how easy and non-destructive this solution can be if you already have one of those screens with a little door which allows you to open the window behind it. Jennifer got her wire cubes from Walmart for CAD $20 each, making this whole project only CAD $100.

image image

image2012: To the left is a photo from Andrew near San Jose, CA. This enclosure cost him only $100.


2012: Marilyn posted this photo to our Facebook page. For the cost of only two boxes of cubes, she was able to make a starter “catio” accessed from a basement window. Her lovely Calico can get a taste of the great outdoors while she slowly expands the enclosure, if she chooses. If you have big dreams but your budget is tight, you could conceivably create a very large enclosure by just buying a box or two of cubes a month.

2012: Tudor from Portland, ME sent us the wonderful photo below of how an enclosure was created to fit into a corner of the house, from which this long-haired beauty can enjoy the cool grass. Here’s Tudor’s own description of the building process: “It took 10 of the 4-cube packages and a ton of cable ties. I made the stairs sturdy by building them as 6-sided blocks, burying them in a couple inches of rocks, and attaching them to the rest of the structure. I added a support ‘beam’ near the middle to keep the roof from sagging. Adding the (prefab) cat door to the window screen was relatively easy, but required cutting wire pieces to connect the structure to the window. To do this, I used the same type of wire square, which I cut to size using wire clippers on the interior of the grid. To cut the thicker outside edges, I scored them with the clippers, then fatigued the metal by stepping on it. I made the triangle piece for the front of the roof in the same way. I used some inexpensive, sold-by-the-foot astroturf on the ‘stairs.’ Thanks for the great ideas, Tudor!


It might be hard to envision everything your project needs before you begin building, but once you start putting the cubes together tons of ideas will make themselves evident to you. And if you don’t like how it’s turning out, simply take it all apart and start over!

2012: Terri from Pennsylvania sent the photos below of the elaborate run she created to take advantage of all the space she could. It uses 5-6 boxes of cubes from Target and includes hanging toys and things to climb on (and in!) for interest. These photos are important for another reason, as they show what you’ll need to do when building a run that has to conform to different ground or floor levels (see red boxes in photo below). As I mentioned on the previous page, I remade our original enclosure into a run which came down off our deck. It also uses this method of overlapping and zip-tying the wire panels (without connectors) to fill in the gaps left when your second level isn’t exactly 14 inches from your first…which is always. It’s admittedly not pretty but it works and, thanks to the zip ties, remains strong and secure.




The inset photo above shows how Terri later remodeled the portion on the ground to be two panels high, after she discovered something that bears repeating: it’s important to make sections you expect your cat to spend any time in be a minimum of two panels high. They don’t need to be any higher than that unless you absolutely must make use of all the vertical space you can (in which case you’ll need to build in platforms or shelves so your cat can take advantage of it, too), but a cat cannot comfortably sit up in a section that’s only one panel high.

2012: After Shaina from Kansas found her outdoor cat inside a neighbor’s raccoon trap, she knew something had to be done to keep LuLu safe. Using our tutorial, she constructed the enclosure below.



Shaina rents and cannot make any doorway to the enclosure for LuLu, so she has to put her inside it. To facilitate this, she left one panel untied, and just removes it and replaces it. As you can see, there’s a bed in there for LuLu, and toys to keep her occupied. Much of the structure is under the cover of the porch so even when Shaina isn’t home, her cat will be safe from the elements. Shaina also used some inexpensive rubber mats (great idea) to provide seating on the shelves, and also to block off a portion of it for further protection from rain. Shaina’s looking for a new place to live, so the portability of this solution is an added bonus, since she’ll be able to disassemble and reassemble it to take advantage of her new space when the time comes. Shaina tells us something we thought we should mention: LuLu hates this “cage”. Almost all cats who are used to being able to run free outdoors will not be happy with this or any enclosure you build for him/her, at least at first. It helps to be forewarned that a lack of appreciation is something you might have to deal with.

2013: Our first submission for 2013 comes from Tania in Lakewood, Colorado, who reports that their new enclosure makes Ginger and Jake “happier than ever”. And they do look contented in this attractive configuration with two seating areas, don’t they?


As you might have guessed from the photo, the cats get into the enclosure via the window. Tania decided to use only the panels with the 8 wires across because she discovered that with the panels with only 4 wires, one of her cats could get both his head and a front leg out at the same time, so she was afraid he would get stuck, or possibly escape. I hadn’t heard of this with an adult cat before (and one of our cats is quite small), but since we now know it’s possible, you’ll want to watch your cats in their new enclosure for awhile to see how they react to it.

2013: Carrie from California posted the photo below of her nearly-completed enclosure to our Facebook page. As you can see, it’s built to fit into an enclosed patio.


If you own your home and have a smaller fenced yard, instead of building an enclosure, you might consider this alternative from http://catfencein.com/

2013: Kerstin from North Carolina built the enclosure below using about 2-1/2 boxes of cubes that she bought from Target. Salem was used to being able to go out before he came to live with Kerstin in her apartment complex, and if you’ve ever had the experience of trying to make an outdoor cat into an indoor-only one, you know how insufferable a cat can be when he WANTS TO GO OUT. But Kerstin says Salem loves his new catio, and you can see what a character he is in the bottom photo, which is from Kerstin’s Facebook page.


“I constantly marvel at the ingenuity and creativity of our readers, who are so resourceful in adapting the flexibility these cubes provide to the needs of each individual installation.

2013: Just look at this AWESOME house-hugging solution for an upstairs cat run! Photo from the Facebook page of “https://www.facebook.com/photo.php?fbid=556334894427459&set=a.216321248428827.53570.216095098451442&type=1&theater  (You will have to sign in to FB in order to see it. Note that there are no instructions there for constructing this, but the photo should be adequate enough to allow you to copy it for your own installation.)


2013: Sue from Pennsylvania built the enclosure below from boxes of cubes she bought at Bed, Bath & Beyond…with coupons! (Nice going, Sue!) 2-year-old Siri can now enjoy the view from one of several shelves built into the space, which Sue supported using readily-available PVC pipe. This installation is different from the others we’ve seen so far, in that Sue wasn’t able to use the ground for support, so it necessitated several changes from our usual building suggestions. Because the bottom is supported by a table and not the ground, she did use wire panels on the bottom for more support, but covered them up so Siri wouldn’t have the uncomfortable task of walking on wire. And because a taller structure without adequate depth isn’t as stable, she used plastic strapping (from Home Depot’s plumbing department) to attach the sides to the window frame. People often call us asking what we use to attach our enclosure to the side of the house, and I tell them that because of the weight and depth of the enclosure, it shouldn’t need attaching to anything, but in this instance you can see that is not the case. (Continued below photo.)


Also, Sue noted what most others have, which is that she probably should only have built the structure 4 panels high. She found that after 4 panels, her enclosure started to become less stable, and Siri is just not interested in the higher levels. This is something we’ve found to be universally true, regardless of your cat’s fondness for higher levels inside your house, so as your particular installation allows, you are better off building OUT rather than UP. I now really regret that our original photos show the first incarnation of our own enclosure, which we later remodeled into more of a run because our cats were not interested in the height, either.Sue’s method for giving Siri access to the outdoors was particularly inventive and non-destructive, if you happen to be a renter: She removed the window screen and replaced it with fiberglass screening attached to a tension rod! Keep in mind that your cat will still want access to his/her enclosure in the winter, so if anyone comes up with a good, inexpensive way to make this type of access weather-proof, we’d love to hear it. So far, the only winter-safe access points we know of are either destructive or expensive.


2013: Here’s a tall order: How can a 60-year-old arthritic lady on a fixed income afford her own outdoor cat enclosure? Well, KrisAnn from California planned and built this entire enclosure by herself, over several days, and feels justifiably pleased at the outcome.


She started by putting some old cat trees outside under the eaves of her home (which also function as stairs for the cats to come and go through the window) and building around them. KrisAnn could not find these cubes at any local stores, but discovered that not only does Bed, Bath and Beyond http://www.bedbathandbeyond.com/product.asp?SKU=16719773” have them online, but they only charged her $11 to ship 6 boxes. (Obviously, this link may not work after 2013, and the shipping price may be quite different after that as well.) For the cats’ access to the enclosure, she bought something I’ve never seen before (isn’t the internet marvelous?!); a “pet screen door”, expressly for installing into an existing window or door screen. It’s ridiculously inexpensive and extremely simple to install. She purchased hers from http://www.discountramps.com/pet-screen-door.htm Discount Ramps.com. Their product page has all the information you’ll need, including the PDF of the 3-step installation instructions. All the materials, including shipping, for this whole set-up cost her exactly $162, and she reports that her 6 cats are absolutely thrilled with their new play space.

2013: Shown below is another installation that needed to use something other than the ground for support. Brandi from Iowa used a white shelf affixed to the house with white L brackets as the base for her enclosure. She says, “They match the house so no one really notices the shelf at all,” and she’s even received compliments on it. This design used only two boxes of cubes. Brandi bought two more boxes in case she wants to later expand it. (If you can afford it, I highly recommend buying more boxes than you think you’ll need, as there’s no guarantee that you’ll be able to find them later at an affordable price, or at all. When I started buying them several years ago, the panels to build six cubes came in one box. I don’t think anyone offers that anymore.) Brandi got creative and disassembled an old cat tree to use as the base for the enclosure. She used its seating areas as “shelves” for them to sit on outdoors. Right now the eaves of her house provide shelter from the weather, but she plans to put in more weather-resistant seating before the first snowfall (yes, your cats will go out there even in the rain and snow.)


Right now, Brandi has to open a window to allow her 3 cats access, and they’re not subtle in their demands for that window to open! So there’s no question about how they feel about their new access to the fresh air, but as it turns out, even her neighbor loves it: She enjoys looking out her kitchen window every morning, watching the cats play.

2013: Marilyn from Nova Scotia, Canada says of her new cat enclosure, “They can come and go all day and I can close the window at night, so we don’t receive unwanted visitors.” It looks like access to the enclosure is from a basement window.


2013: Laurie from Southern California built an elaborate enclosure for her two cats and then posted the whole thing on her own blog. It’s so impressive that I’ve simply linked to her blog post (click the photo) so you can see all the photos and read the details for yourself. http://toughkittypuffs.blogspot.com/2013/07/catio.html




Cathy lives near Calgary, Alberta, and set up her outdoor enclosure when her kittens, Vader and Ivy, were only 6 months old. Ivy could still squirm her way out of it, so she locked the door and tried again later. On the third attempt, they both were too big to escape from it, so now it’s open year-round. In spite of some bitterly cold winters, her cats still use it in all weather. Cathy keeps the cold out of her house by having the enclosure access in her basement. Since it didn’t have to be pretty, she also reduced the hassle of installing a cat door by simply fitting some plywood into an always-open sliding window, and installing the door into the plywood (great idea!). This would also work with a double hung window.



We both had spent weeks on various ideas and searching the ‘net and we just couldn’t find anything that was suitable and reasonably priced. One day I was surfing the ‘net and your website caught my eye. I nearly jumped off the sofa! This idea was a snap and we knocked it out in about 3 hours.


2014: Our first submission for 2014 comes from Sandra of San Mateo, CA (just south of San Francisco), who rents an apartment with a generous-sized balcony. After she found our DIY page, she managed to get 4 boxes of cubes from Target when they were on sale (score!) and built this really bee-yoo-ti-ful enclosure with access from a kitchen window. All she had to do was remove the screen from the window, and she had herself an outdoor enclosure accessible to her cats whenever they want it, with no modifications or damage to the structure itself. Her beautiful cat Tai, the more adventurous one, can now come and go as he pleases, pleasing both human and cat. Matching up the enclosure to the sliding window left a gap above the enclosure top, which a resourceful cat would quickly realize is his escape to freedom. She solved this cheaply and easily by simply using one wire panel to block the upper portion of the window, which can be seen in the photo to the left. I just love the whimsical details she added to the enclosure, which includes some inexpensive garland and artificial plants from Michael’s (also on sale), pleases the human eye but doesn’t detract from the function from a cat’s point-of-view, doesn’t take any upkeep, and helps to soften the otherwise mildly industrial look of wire panels. All in all, she has a really nice-looking enclosure that compliments her home, makes her cat happy, doesn’t compromise her rental agreement, and can easily be taken apart and reconfigured wherever she goes next… and it only cost her about $100. You can see more photos of Sandra’s catio on http://youkaiyume.tumblr.com/post/78393837608/home-made-catio-tai-got-to-play-in-it-for-the


2014: Hannah from Chicago posted this photo of her catio to https://www.facebook.com/CatAndCaboodle our Facebook page. They built it between two trees in their yard. The plastic used for seating has been secured with zip ties to the wire so it will not slide around. She writes that her cat, Kimiko, wanted to be outside with them when they were doing yard work (“Why are the DOGS allowed out but I’m stuck in here?!”), and now she has her wish.


2014: Carole Anne from Ottawa, Ontario built this lovely, rambling enclosure on her deck for her cats Junior and Zena. A friend with shop tools cut the wood piece to fit in her window frame, into which was installed the cat door. And here’s a big bonus we haven’t heard of before. Carole Anne writes of her gorgeous longhair, “Junior is no longer bored, so he hasn’t been waking me up at night for the first time in a long time.” How’s that for a big benefit!




2014: The very happy-looking lady in the photo above is the mother of Desiré from Charlotte, NC, who wrote us an email that blew us away and made all the effort put into documenting this inexpensive solution worthwhile. Desiré told us that she and her mother had been looking for months for some way to allow outdoor access for Gigi, her mother’s cat. Desiré’s mother lives on the third floor of an independent living apartment. While she does have her own balcony, she is not allowed to enclose it in any way, even with screening. They were thrilled to discover that for only $90 they could put together an enclosure that can’t even be seen from outside her balcony, but which finally gives Gigi a safe place for some bird-watching (which is what the stool is for). 4 months later, they remodeled the enclosure to give Gigi a lot more room to roam and bird-watch:



I used to access this wonderful resource on how to build your own “Catio” or outdoor cat enclosure. Unfortunately, the host had to dismantle her website. She was however, kind enough to release copyright and send all of the pages to me to re-post! I will be re-posting them here and also the Community Cat Coalition will be hosting on their website as well. This was just such an amazing resource for indoor cat owners I did not want to see it disappear! Hit next page to see the post.